Long Life Tungsten Carbide Insert Cold Heading Die For Stainless Steel Wire
Production Description
Carbide Nozzles are an excellent choice for manufacturing ferrous metal rod size wires and relatively short production and trial runs. Cemented carbide blanks have extremely high density, hardness and strength. There are round wire drawing dies of 0.1 mm (.004 inch) or a larger size to choose from.
Features:
Faster speed: Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. The special shape inside the nozzle — made possible by Dyze Design’s machining and manufacturing techniques — improves the flow where the diameter tapers, thus allowing a faster flow rate.
Low friction: The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This results in cleaner parts and fewer issues from drag.
Advantage
The high wear resistance of our tungsten carbide nozzles will ensure that even the most abrasive filament can be printed with confidence.
The high thermal conductivity of tungsten carbide means you can print faster.
Tungsten carbide will not soften at high temperatures like hardened steel, resulting in a longer-lasting nozzle. Print up to 500c with high abrasion resistance!
Our tungsten carbide nozzle is a single piece, single material nozzle, meaning thermal conductivity and optimized flow is maintained through the entire nozzle, unlike multi-material tungsten carbide tipped nozzles.
Tungsten carbide nozzles are less expensive to manufacture than ruby or sapphire tipped nozzles and maintain better flow and temperature stability at the nozzle tip.
Grades and Properties
| Grade | Density(g/cm3) | Hardness(HRA) | TRS(MPa) |
| YG6X | 14.95 | 91.5 | 1800 |
| YG6 | 14.95 | 90.5 | 1900 |
| YG8 | 14.8 | 89.5 | 2200 |
| YG10 | 14.5 | 88.5 | 2400 |
| YG15 | 14.0 | 87.0 | 2800 |
Performance Chart
Product Packaging
Company Introduction
JWE Carbide Co., Ltd. is designated as a high-tech and new material enterprise was founded in March of 2005, with a registered capital of USD1, 000, 000, located in Lukou Economic Zone of Zhuzhou city, the hometown of Chinese Tungsten Carbide. Our factory covers an area of 20,000 square meters, equipped with advanced technologies and manufacturing equipment, we major in researching, developing, and producing medium and high-grade tungsten carbide products.
FAQ
Q: Are you a trading company or manufacturer?
A: We are a professional factory for 15 years.
Q: Trade Assurance?
A: We have joined the Trade Assurance on Alibaba to protect your payment to make sure that we deliver on time and manufacture quality products as required.
Q: How to send an inquiry?
A: It's better to send us detailed specifications of products, it's better attaching some photos for better understanding, You
can:-Send us an inquiry from the Alibaba.com platform.-Send email to us directly, salespersons always wait for service at work.
Q: How do you guarantee your quality?
Firstly, we do a quality test during every process. And we use production instruction cards when one process finished, the work will be signed on the production instruction cards. Secondly, we will collect all comments on our products from customers in time. And try our best to improving quality all the time.
Q: Do you offer samples?
A: Yes, we do offer samples. However, buyers need to pay for the freight charge. In addition, whether samples are free or not depends on the quantity you buy.
Q: What kinds of payment do you accept?
A: In addition to the patterns of payment shown above, you can discuss with us in which way you would like to pay.
Product Tags:
|
|
Grade YG10 Tungsten Carbide Dies Images
|
